A-728S with Aluminium Suction Cup
SKU:
L081050
CA$0.00
per item
The A728 is the newest gun in our HVLP line and features a non-bleeder design, simplified adjustment and a 1 quart container. Advantages of a non-bleeder paint spray gun are that they run cooler and quieter, may have less build up on the air cap and stir up less dust in the work area.
This gun features a lightweight, precision cast aluminum body, a high flow air valve and convenient rear mounted spray fan control. The A728 HVLP gun has a wide range of needle/nozzle sizes available; from 1.0 mm up to 2.0 mm.
Materials which can be sprayed include varnish, urethane, lacquer, automotive paint, epoxy, enamel, stain, latex, oil base, multi color, etc.
Note: If upgrading a T-55 or T-75 system to the A-728 gun, kit L080-649 is required to vent excessive pressure when the trigger is closed, and to reduce heat stress on the turbine motor. The T-90, T-95 and T-97 are already designed to accept a non-bleeder gun.
This gun features a lightweight, precision cast aluminum body, a high flow air valve and convenient rear mounted spray fan control. The A728 HVLP gun has a wide range of needle/nozzle sizes available; from 1.0 mm up to 2.0 mm.
Materials which can be sprayed include varnish, urethane, lacquer, automotive paint, epoxy, enamel, stain, latex, oil base, multi color, etc.
Note: If upgrading a T-55 or T-75 system to the A-728 gun, kit L080-649 is required to vent excessive pressure when the trigger is closed, and to reduce heat stress on the turbine motor. The T-90, T-95 and T-97 are already designed to accept a non-bleeder gun.