A-728P HVLP Pressure Feed
The A728S is the newest gun in the Lemmer HVLP line and features a non-bleeder design, simplified adjustment and a 1 quart container. Advantages of a non-bleeder gun are that they run cooler and quieter, may have less build up on the air cap and stir up less dust in the work area.
The pressure feed gun is used with a remote pressure pot or a transfer pump.
This gun features a lightweight, precision cast aluminum body, a high flow air valve and convenient rear mounted spray fan control.
Materials which can be sprayed include varnish, urethane, lacquer, automotive paint, epoxy, enamel, stain, latex, oil base, multi color etc.
Note: If upgrading a T-55 or T-75 system to the A-728 gun, kit L080-649 is required to vent excessive pressure when the trigger is closed, and to reduce heat stress on the turbine motor. The T-90, T-95 and T-97 are already designed to accept a non-bleeder gun.
Applications:
• lacquer
• urethane
• stain
• epoxy
• automotive paints
• thinned latex
• thinned oil base
Features:
• Fully adjustable spray pattern.
• Chrome plated alloy body.
• Hollow body for true HVLP performance.
• Turbine version gun will hook up to most turbines on the market.
Specifications:
For Lemmer turbine T-90Q
Fluid inlet: 3/8 NPS-M
Air inlet: Quick Connect
Atomization: external
Nozzle Sizes available:
1.0mm
1.3mm
1.5mm
1.8mm
2.0mm
2.8mm
|
Caractéristiques:
• Passage de fluide en acier inoxydable • Joints d’étanchéités de pompe fixes à ressort qui s'ajustent automatiquement. • Les valves de fluide sont en carbure de tungstène résistant à l'abrasion et en acier inoxydable. • Silencieux de grande surface pour maintenir un environnement de fonctionnement silencieux. • Un débit de produit constant qui offre une excellente pulvérisation • Conception avec peu de pièces d'usure, conçue pour un entretien facile • Une chambre de rinçage fermée sépare le moteur pneumatique et la pompe à fluide. Le matériel de rinçage empêche les incrustations de peinture sur la tige de piston et, grâce à son effet lubrifiant, protège les joints. |
Spécifications:
Rapport: 52:1 (5200 psi de fluide à 100 psi d'air) Entrée d'air max 116 PSI Utilisation d'air: 27 cfm à 100 psi avec buse 0,023 Pression maximale: 6149 PSI Volume de débit libre: 1.7 GPM (max) (6.5L./ min) Debit a la Vitesse recommandée: 2.6 L/min a 60 cycles/min Buse max.: 1x 0,029 (max) ou 2x 0,021 ou 3x 0.013 Hauteur: 31.5" Poids: 40 lbs |
| Littérature Pompe Wiwa 6552GX |
|
Features:
•Fluid passage in stainless steel •Stationary spring loaded pump packings which automatically adjust themselves. •Fluid valves are made of abrasion resistant tungsten carbide and stainless steel. •Large area mufflers to maintain quiet operating surroundings. •Consistent spray pressure provides an excellent spray pattern •Design with few wear parts, designed for easy maintenance •A closed flushing agent chamber separates air motor and fluid pump. The flushing material prevents encrustations of paint on the piston rod and with its lubricating effect protects the seals. |
Specifications:
Ratio: 52:1 (~5200 psi fluid @ 100 psi air) Air inlet max 116 PSI Air use: 27 cfm@ 100 psi with 0.023 tip Maximum pressure: 6149 PSI Free Flow Volume: 1.7 GPM (max) (6.5 L/min) Flow at Recommended Speed: 2.6 L/min at 60 cycles/min Tip: 1x 0.029" (max), 2x 0.021" or 5x 0.013" Height: 31.5" (bare) Weight: 40 lbs (bare) |
| Literature 6552GX Wiwa |
| 6552GX part Diagram / diagramme de pièces |