- Products
- >
- Air Spray Gun
- >
- A-910G Air Spray Gun conventional with PPS
A-910G Air Spray Gun conventional with PPS
SKU:
L015024
CA$0.00
Unavailable
per item
This is a high quality conventional paint spray gun designed for use with the new waterborne products. The A-910G features a stainless steel 3M fluid fittings, needle and nozzle. The 3M PPS container system which is fully compatible with all products and allows spraying at any angle without fan flutter. The disposable liner makes clean up fast and easy!
Le contrôle de la largeur de pulvérisation est ajusté en haut à l'arrière du pistolet, le motif horizontal et vertical est contrôlé au niveau du chapeau d'air et le flux de produit est contrôlé à l'arrière du pistolet. Les matériaux qui peuvent être pulvérisés comprennent le vernis, l'uréthane, la laque, la peinture automobile, l'époxy, l'émail, la teinture, le latex, la base d'huile et les revêtements industriel de haute viscosité en utilisant un ensemble de pointeau plus gros. Le pistolet a alimentation par gravité est livré avec le système de poche 3M PPS de 650ml. L'aiguille et le siège sont en acier inoxydable et l'ensemble du pistolet peut être placé dans une armoire de nettoyage pour pistolet. Le pistolet à gravité est fourni avec une buse à usage général de 1.4 mm.
Applications:
• Finition de meubles • Finition automobile • Revêtements industriels • Réfection d'aéronefs |
Fonctionnalités:
• Contrôles complets • Corps de pistolet tout en métal • Facile à utiliser • Facile à nettoyer • Vaporisez sous n'importe quel angle |
Spécifications:
Exigences: 7 cfm @ 40psi Entrée PSI (typique): 35 - 45 psi Entrée de fluide: 3/8 "M Entrée d'air: 1/4 "NPS-M Taille du contenant: 3M PPS 2.0 de 650ml Taille d'expédition (pouces): L 9 x W 6 x H 5 Poids à l'expédition: 3 lb (1,3 kg) |
Tailles de buses disponibles:
1.1 mm L015850 1.4 mm L015851 1.8 mm L015854 2.0 mm L015852 2.5 mm L015853 3.0 mm L015864 |

Litérature A-910G Pps | |
File Size: | 137 kb |
File Type: |
Spray fan width control is adjusted at the top back of gun, horizontal and vertical pattern is controlled at the air cap and material flow is controlled at the back of the gun. Materials which can be sprayed include varnish, urethane, lacquer, automotive paint, epoxy, enamel, stain, latex, oil base and heavier exotic coatings when using the larger nozzle set. The gravity feed gun comes with a Pps 2.0 from 3m of 650ml container. The fluid needle and seat are made of stainless steel and the entire gun can be placed in a gun cleaning cabinet. The gravity gun is supplied with a 1.4 mm general purpose nozzle.
Applications:
• Furniture finishing • Automotive finishing • Industrial coatings • Aircraft refinishing |
Features:
• Full controls • All metal gun body • Easy to use • Easy to clean • Spray at any angle |
Specifications:
Requirements: 7 cfm @40psi PSI input (typical): 35 - 45 psi Fluid inlet: 3/8" M Air inlet: 1/4" NPS-M Container size: 3M PPS 2.0 of 650ml Shipping size (inch): L 9 x W 6 x H 5 Shipping weight: 3 lbs (1.3kg) |
Nozzle Sizes available:
1.1 mm L015850 1.4 mm L015851 1.8 mm L015854 2.0 mm L015852 2.5 mm L015853 3.0 mm L015864 |

Literature A-910G pps | |
File Size: | 87 kb |
File Type: |

Part Diagram / Diagramme de pièce A-910 | |
File Size: | 150 kb |
File Type: |

Old Pps System / Ancien système PPS | |
File Size: | 165 kb |
File Type: |

Pps System 2.0 (2018 up ) / Pps 2.0 (2018 et +) | |
File Size: | 415 kb |
File Type: |

Owner Manual A-910 / Mode d'emploi A-910 | |
File Size: | 255 kb |
File Type: |
Customers who purchased this item also purchased the following accessories:
Les clients qui ont acheté cet article ont également acheté les accessoires suivants: