- Lube wet Cup regularly to prevent paint from drying on piston and upper packing.
- This will reduce wear on piston and packing
WARNING
Do not used with rubber packing,airline oilers or air motor
- Lubrifiez régulièrement le réservoir d'huile de la pompe pour empêcher la peinture de sécher sur le piston et les joint d étanchéité supérieure.
- Cela réduira l'usure du piston et des joint d étanchéité.
ATTENTION
Ne pas utiliser avec une joint en caoutchouc, des huilier à air ou un moteur pneumatique
A-935 HVLP Air Spray Gun with Nylon Cup
The metal gun is durable and has a light weight nylon gravity container with a non-drip screw on lid. Spray fan control is adjusted on the side of the gun, horizontal and vertical pattern is controlled at the air cap and material flow is controlled at the back of the gun. Materials which can be sprayed include varnish, urethane, lacquer, automotive paint, metallic, epoxy, enamel, stain, latex, oil base, multi-color, etc. The gun comes with a 600 mL container. The fluid needle and seat are made of stainless steel and the entire gun can be placed in a gun cleaning cabinet. This gun is supplied with a 1.5 mm general purpose nozzle for thin materials such as lacquer, stain and enamels and includes a 2.0 kit for latex and oil base.
Applications:
• Furniture finishing
• Automotive finishing
• Industrial coatings
• Multi-Color coatings
Features:
• Professional HVLP
• All metal gun body
• Easy to use
• Easy to clean
Specifications:
Requirements: 2-7 cfm @60psi
PSI input (typical): 20 - 60 psi
Fluid inlet: 3/8" M
Air inlet: 1/4" NPS-M
Atomization type: External HVLP
Atomization (external): 10 psi max
Container size: 600 mL
Shipping size (inch): 13.5H 11.3W 3.6W
Shipping weight: 3.3lbs(1.5kg)
Nozzle Sizes available:
1.0mm
1.5mm
2.0mm
2.5mm
T-55Q HVLP Turbine with Suction Gun
This professional HVLP paint sprayer system is excellent for both the handyman and the professional. Its quiet 2 stage turbine (74 db) provides dry warm air to the all metal A-712S bleeder type guns and comes with an insulated handle.
This competitively priced system uses very advanced noise suppression materials. The T-55Q HVLP turbine sprays all conventional coatings including lacquer, enamel, latex, stain and other light materials.
This system is a complete kit which includes: T-55Q turbine, A712 gun with general purpose 1.4mm needle, 25 ft air hose, air flow control valve, service kit and viscosity cup.
Specifications:
8 Amps @ 120 VAC
4 PSI - sealed
2 PSI - spraying
2 stages turbine
5.7" Turbine diameter
Sound Level 74 DB
Air filtration: Large area foam, washable
25' Turbine Hose supplied
25' Maximum turbine hose
Shipping weight: 29 lbs
Shipping size (inch): 15.3L x 16.3W x 15.8H
Nozzle recommend for a neat finish with the T-55Q
0.7mm
1.0mm
1.2mm
1.4mm
1.6mm
1.8mm
Nozzle Sizes available:
0.7mm
1.0mm
1.2mm
1.4mm
1.6mm
1.8mm
2.0mm
2.8mm