A-910G Gun with PPS
This is a high quality conventional paint spray gun designed for use with the new waterborne products. The A-910G features a stainless steel 3M fluid fittings, needle and nozzle. The 3M PPS container system which is fully compatible with all products and allows spraying at any angle without fan flutter. The disposable liner makes clean up fast and easy!
Spray fan width control is adjusted at the top back of gun, horizontal and vertical pattern is controlled at the air cap and material flow is controlled at the back of the gun. Materials which can be sprayed include varnish, urethane, lacquer, automotive paint, epoxy, enamel, stain, latex, oil base and heavier exotic coatings when using the larger nozzle set. The gravity feed gun comes with a 650ml container. The fluid needle and seat are made of stainless steel and the entire gun can be placed in a gun cleaning cabinet. The gravity gun is supplied with a 1.4 mm general purpose nozzle.
Applications:
Furniture finishing
Automotive finishing
Industrial coatings
Aircraft refinishing
Features:
Full controls
All metal gun body
Easy to use
Easy to clean
Spray at any angle
Specifications:
Requirements: 7 cfm @40psi
PSI input (typical): 35 - 45 psi
Fluid inlet: 3/8" M
Air inlet: 1/4" NPS-M
Container size: 1 quart
Shipping size (inch): L 9 x W 6 x H 5
Shipping weight: 3 lbs (1.3kg)
Nozzle Sizes available:
1.1mm
1.4mm
1.8mm
2.0mm
2.5mm
3.0mm
The fluid needle and seat are made of stainless steel and the entire gun can be placed in a gun cleaning cabinet. The A-580P comes with a 1.0 mm nozzle.
|
Applications:
• Furniture finishing • Automotive finishing • Industrial coatings • Multi-Colour coatings |
Features:
• Professional quality • All metal gun body • Easy to use • Easy to clean • more easy to handle for a small hand |
Specifications:
Pressure: 4-7 cfm @ 60 psi PSI input (typical): 20 - 60 psi Fluid inlet: 3/8" NPS-M Air inlet: 1/4" NPS-M Atomization type: External conventional |
Nozzle Sizes available:
0.8 mm L015321 1.0 mm L015322 1.3 mm L015323 1.5 mm L015324 1.8 mm L015325 |
| Literature A-580P |
Le pointeau et le siège sont en acier inoxydable et l'ensemble du pistolet peut être placé dans une armoire de nettoyage de pistolet. Le pistolet A-580P est livré avec une buse de 1.0 mm
|
Applications:
• Finition de meubles • Finition automobile • Revêtements industriels • Revêtements multicolores |
Caractéristiques:
• Qualité professionnel • Corps de pistolet tout en métal • Facile à utiliser • Facile à nettoyer • Plus facile à manipuler pour une petite main |
Spécifications:
Pression: 4-7 cfm @ 60 psi Entrée PSI (typique): 20 - 60 psi Entrée de fluide: 3/8 "NPS-M Entrée d'air: 1/4 "NPS-M Type d'atomisation: externe conventionnel |
Tailles de buses disponibles:
0.8 mm L015321 1.0 mm L015322 1.3 mm L015323 1.5 mm L015324 1.8 mm L015325 |
| Littérature A-580P |
| Parts Diagram A-580 / Diagramme de pièce A-580 |
| Owner Manual A-580 / manuelle d'instruction A-580 |