A-910S SS Gun with PPS
This is a high quality conventional spray gun designed for use with the new waterborne products. The A-910 SS features all stainless steel internal fluid passages, fluid fittings, needle and nozzle. Featured on the suction version is the 3M PPS container system which is fully compatible with all products and allows spraying at any angle without fan flutter. The disposable liner makes clean up fast and easy!
Spray fan width control is adjusted at the top back of gun, horizontal and vertical pattern is controlled at the air cap and material flow is controlled at the back of the gun. Materials which can be sprayed include varnish, urethane, lacquer, automotive paint, epoxy, enamel, stain, latex, oil base and heavier exotic coatings when using the larger nozzle set. The suction feed gun comes with a 850 ml container and can also be used with an optional remote pressure pot. The fluid needle and seat are made of stainless steel and the entire gun can be placed in a gun cleaning cabinet. The suction gun is supplied with a 1.8 mm general purpose nozzle.
Applications:
• Furniture finishing
• Automotive finishing
• Industrial coatings
• Aircraft refinishing
Features:
• Full controls
• All metal gun body
• Easy to use
• Easy to clean
• Spray at any angle
Specifications:
Requirements: 7 cfm @ 40psi
PSI input (typical): 35 - 45 psi
Fluid inlet: 3/8" NPS-M
Air inlet: 1/4" NPS-M
Container size: 850 ml
Atomization type: External conventional
Shipping size (inch): L 9 x W 6 x H 5
Shipping weight: 3 lbs (1.3kg)
Nozzle Sizes available:
1.1mm
1.4mm
1.8mm
2.0mm
2.5mm
3.0mm
|
Applications:
• Furniture finishing • Automotive finishing • Industrial coatings • Aircraft refinishing |
Features:
• Full controls • All metal gun body • Easy to use • Easy to clean |
Specifications:
Requirements: 2-5 cfm PSI input (typical): 15 - 50 psi Air inlet: 1/4" NPS-M Container size: 125ml Atomization type: External HVLP Shipping size (inch): 4.5" L 4.5" W 8" H Shipping weight: 1.68lbs (765g) |
Nozzle Sizes available:
0.5mm L016101 0.8mm L016102 1.0mm L016103 1.2mm L016104 |
| Owner manual A-601 |
| Parts Diagram A-601 |
|
Applications:
• Finition de meubles • Finition automobile • Revêtements industriels • Revêtements multicolores |
Fonctionnalités:
• Control complet • Corps de pistolet tout en métal • Facile à utiliser • Facile à nettoyer |
Caractéristiques:
Exigences: 2-5 cfm Entrée PSI (typique): 15 - 50 psi Entrée d'air: 1/4" NPS-M Type d'atomisation: HVLP externe Atomisation (externe): 10 psi max Taille du contenant: 125 ml Taille d'expédition (pouces): 8H 4.5W 4.5W Poids à l'expédition: 1.68 lb (765g) |
Tailles des pointeaux disponibles:
0.5mm L016101 0.8mm L016102 1.0mm L016103 1.2mm L016104 |
| Manuelle Instruction A-601 |
| Diagramme de piece A-601 |