A-910G Gravity Gun, Conventional
The A-910 conventional spray gun is designed for furniture fine finishing, auto body shops, metal fabrication shops, contractors and hobbyists. The metal gun is durable and has a large pot opening for easy cleaning.
Spray fan width control is adjusted at the top back of gun, horizontal and vertical pattern is controlled at the air cap and material flow is controlled at the back of the gun. Materials which can be sprayed include varnish, urethane, lacquer, automotive paint, epoxy, enamel, stain, latex, oil base and heavier exotic coatings when using the larger nozzle set. The gravity feed gun comes with a 600ml container. The fluid needle and seat are made of stainless steel and the entire gun can be placed in a gun cleaning cabinet. The gravity gun is supplied with a 1.4 mm general purpose nozzle.
Applications:
• Furniture finishing
• Automotive finishing
• Industrial coatings
• Aircraft refinishing
Features:
• Full controls
• All metal gun body
• Easy to use
• Easy to clean
• Spray at any angle
Specifications:
Requirements: 7 cfm @40psi
PSI input (typical): 35 - 45 psi
Fluid inlet: 3/8" M
Air inlet: 1/4" NPS-M
Container size: 600ml
Atomization type: External conventional
Shipping size (inch): L 9 x W 6 x H 5
Shipping weight: 3 lbs (1.3kg)
Nozzle Sizes available:
1.1mm
1.4mm
1.8mm
2.0mm
2.5mm
3.0mm
|
Caractéristiques du A-910 :
Exigences: 4-10 cfm @ 60psi Entrée PSI (typique): 30 - 60 psi Entrée de fluide: 3/8 "NPS-M Entrée d'air: 1/4 "NPS-M Type d'atomisation: externe conventionnel |
Spécifications du boyau double:
Caractéristiques du boyau a air (5 'x 1/4 "): • Flexible et léger avec une conception a double spirales. • Tube interieur: caoutchouc EPDM résistant à l'huile. • Revêtement exterieur: caoutchouc EPDM résistant aux solvants, à l'abrasion et aux intempéries. • Pression de service de 200 PSI. |
|
Caractéristiques du pot sous pression de 2 Litres
Pression maximale: 50 psi Entrée d'air: 1/4 "NPS-M Sortie d'air: 1/4 "NPS-M Sortie de fluide: 3/8 "NPS-M Soupape de sécurité: 50 psi |
Caractéristiques du boyau à produit (5 'x 1/4 "):
• Conception flexible et légère. • tube interieur: polyéthylène / thermoplastique résistant aux solvants. • Revêtement: caoutchouc thermoplastique résistant aux solvants. • Pression de service 175 PSI (@ 20 ° C). |
The A-910 conventional spray gun is designed for furniture fine finishing, auto body shops, metal fabrication shops, contractors and hobbyists. Spray fan width control is adjusted at the top back of gun, horizontal and vertical pattern is controlled at the air cap and material flow is controlled at the back of the gun. Materials which can be sprayed include varnish, urethane, lacquer, automotive paint, epoxy, enamel, stain, latex, oil base and heavier exotic coatings when using a larger nozzle set.
|
A910 Specifications:
Requirements: 4-10 cfm @60psi PSI input (typical): 30 - 60 psi Fluid inlet: 3/8" NPS-M Air inlet: 1/4" NPS-M Atomization: external Conventional 2 Quart Pressure Pot Specifications:
Maximum pressure: 50 psi Air inlet: 1/4" NPS-M Air outlet: 1/4" NPS-M Fluid outlet: 3/8" NPS-M |
Twin Line Hose Specifications:
Air hose features (5' x 1/4"): • Flexible and lightweight two-spiral design. • Inner tube: oil resistant EPDM rubber. • Cover: solvent, abrasion and weather resistant EPDM rubber. • 200 PSI working pressure. Fluid hose features (5' x 1/4"): • Flexible and lightweight design. • Inner tube: solvent proof polyethylene/thermoplastic. • Cover: solvent resistant thermoplastic rubber. • 175 PSI working pressure (@20°C). |
| Literature P.Pot 2 Quart Kit A910P - 5ft in english |
| Litérature ens. Pot pressurisé 2 Litres A-910p 5' en francais |
| Parts Diagram P.Pot 2L / Diagramme de pièce P.Pot 2 L |
| Parts Diagram A-910 / Diagramme de pièce A-910 |