A-580P Mini Conventional Gun
The A-580P paint spray gun is more easy to handle for a small hand and designed for furniture finishing, cabinet spraying, casings and railings, metal fabrication shops or contractors doing general fine finishing work.
Special Features:
• Compact gun
The pressure feed gun is used with a remote pressure pot or a transfert pump
The fluid needle and seat are made of stainless steel and the entire gun can be placed in a gun cleaning cabinet. The A-580P comes with a 1.0 mm nozzle.
Applications:
• Furniture finishing
• Automotive finishing
• Industrial coatings
• Multi-Color coatings
Features:
• Professional quality
• All metal gun body
• Easy to use
• Easy to clean
• Easier to handle with a small hand
Specifications:
Pressure: 4-7 cfm @ 60 psi
PSI input (typical): 20 - 60 psi
Fluid inlet: 3/8" NPS-M
Air inlet: 1/4" NPS-M
Atomization type: External conventional
Nozzle Sizes available:
0.8mm
1.0mm
1.3mm
1.5mm
1.8mm
- Les filets de 1,75 "de diamètre et le tuyau d'aspiration de 18,5 cm conviennent à la plupart des bouteilles de 1 litre.
- Le réglage à l'avant du pistolet permet de contrôler le flux de produit et d'appliquer différentes textures
- Le RP-50 comprend une buse courte de 1/2 "et une baguette plus longue de 9" pour appliquer le revêtement sur les cavités, les poutres creuses, les portes, etc.
- Un tube de rechange de 9 "est également inclus.
- Pression maximale 125 psi
|
Baguette et extension incluses:
|
Caractéristiques:
Air requis: 7-10 cfm Pression d'utilisation (typique): 20 - 40 psi pour produit fin 60 - 90 psi pour produit épais Pression maximale 125 psi Entrée d'air: 1/4 "NPS-M Taille du contenant: 1 litre avec filet de 1,75 "(bouteille non inclus) |
- The 1.75" diameter threads and 18.5cm suction pipe will fit most 1 litre bottles.
- The adjustment on the front of the gun is to control product flow and apply different textures
- The RP-50 includes a short nozzle 1/2" and a longer 9" wand to apply coating to cavities, hollow beams, doors, etc.
- A spare 9" tube is also included.
- Maximum Pressure 125 psi
|
Wand and extension included :
|
Specifications:
Air use: 7-10 cfm PSI input (typical): 20 - 40 psi for thin product 60 - 90 psi for thick product Maximum Pressure 125 psi Air inlet: 1/4" NPS-M Container size: 1 liter 1.75" threads (bottle not included) |
| RP-50 Literature / Littérature |
| RP-50 Owner Manual / Manuelle d' instruction |