A-728P HVLP Pressure Feed
SKU:
L081051
CA$0.00
per item
The A728S is the newest gun in the Lemmer HVLP line and features a non-bleeder design, simplified adjustment and a 1 quart container. Advantages of a non-bleeder gun are that they run cooler and quieter, may have less build up on the air cap and stir up less dust in the work area.
This gun features a lightweight, precision cast aluminum body, a high flow air valve and convenient rear mounted spray fan control. The A728 HVLP gun has a wide range of needle and nozzle sizes available; from 1.0 mm up to 2.0 mm.
Materials which can be sprayed include varnish, urethane, lacquer, automotive paint, epoxy, enamel, stain, latex, oil base, multi color etc.
Note: If upgrading a T-55 or T-75 system to the A-728 gun, kit L080-649 is required to vent excessive pressure when the trigger is closed, and to reduce heat stress on the turbine motor. The T-90, T-95 and T-97 are already designed to accept a non-bleeder gun.
This gun features a lightweight, precision cast aluminum body, a high flow air valve and convenient rear mounted spray fan control. The A728 HVLP gun has a wide range of needle and nozzle sizes available; from 1.0 mm up to 2.0 mm.
Materials which can be sprayed include varnish, urethane, lacquer, automotive paint, epoxy, enamel, stain, latex, oil base, multi color etc.
Note: If upgrading a T-55 or T-75 system to the A-728 gun, kit L080-649 is required to vent excessive pressure when the trigger is closed, and to reduce heat stress on the turbine motor. The T-90, T-95 and T-97 are already designed to accept a non-bleeder gun.