Horizontal and vertical pattern is controlled at the air cap, material flow and spray fan width are controlled at the back of the gun. Materials which can be sprayed include varnish, urethane, lacquer, automotive paint, metalics, epoxy, enamel, stain, latex, oil base, multi-colour, glue, etc. The fluid needle and seat are made of stainless steel, and the entire gun can be placed in a gun cleaning cabinet.
| Applications |
Features |
| Furniture finishing |
Professional quality |
| Automotive finishing |
All metal gun body |
| Industrial coatings |
Easy to use |
| Multi-Colour coatings |
Easy to clean |
| Nozzle chart (Using Ford #4 Viscosity cup) |
| Material |
1.2 mm |
1.8 mm |
2.5 mm |
| Clear finishes (up to 28 sec) |
best |
ok |
no |
| latex &oil base (28 - 80 sec) |
ok |
best |
ok |
| multicolour & glue (80+ sec) |
no |
no |
best | |
| A-908 Specifications |
| CFM use |
6-9 @ 60 psi |
| PSI input (typical) |
30 - 60 psi |
| Fluid inlet |
3/8" nps |
| Air inlet |
1/4" nps |
| Container size |
1 litre |
| Atomization type |
External |
| Shipping size (inch) |
8.5L 5.6W 5.4H |
| Shipping weight |
2.2lbs(1.0 kg) |
| Order number (1.8mm) |
L015-015 | |
