L015-021

A928P HVLP Pressure Feed

The A-928P HVLP pressure feed gun is designed for use with pressure pots or low pressure supply pumps as shown here. Low overspray is achieved by converting compressor air to High Volume Low Pressure in the air cap. Applications for this spray gun include automotive finish coats, furniture fine finishing, metal fabrication, and most other spray type jobs.

Specifications:

CFM requiremens 7 @ 50 psi
PSI input (air) 40 - 80 psi
PSI input (fluid) 5 - 20 psi (typical)
Fluid inlet 3/8" npt
Air inlet 1/4" npt
Atomization 10 psi max

Materials which can be sprayed include automotive paint, metallic, epoxy, urethane, lacquer, varnish, enamel, stain, latex, oil base, multi-color, etc. Spray fan control is adjusted at the top back of gun, horizontal and vertical pattern is controlled at the air cap, and material flow is controlled at the back of the gun. The fluid needle and seat are made of stainless steel, and the entire gun can be placed in a gun cleaning cabinet. This gun is supplied with a 1.4mm general purpose nozzle for thin materials such as lacquer, stain, and enamels. Nozzle sizes 1.0, 1.8, 2.0 &2.8 are available separately.