This professional sprayer is designed for heavy commercial, industrial, and maintenance jobs. Materials which can be sprayed include latex, oil base, elastomeric, heavy architectural coatings, block filler, dry wall, etc. It's slow stroking pump design increases packing and piston life to the maximum. It's PMDC new technology motor has no brushes, requires less amperage, and will never wear out. It is very safe being a brushless motor and runs extremely quiet.
The electronic speed control produces a constant fan even with low pressure fine finish materials. A special feature to extend packing life keeps the prime speed low until the pump is full of material. An override safety circuit shuts the pump off when the pail runs dry to prevent packing damage. This is a tough and dependable 1.1 GPM pump which will handle a .031 tip!
DC-7700 Specifications
| Max tip (1 gun operating) |
.031 |
| Max tip (installed) |
.021 |
| Pressure range |
0 - 3000 psi |
| Volume output (@2000psi) |
1.1 gpm |
| Spraying with .031 |
2000 psi |
| Max. hose length |
300 ft |
| Max. power cord |
300 ft |
| Pump type |
piston |
| Motor size |
1.6 hp PMDC |
| Amp draw @ 120 V |
12.55A |
| Bare weight |
95 lbs |
| Shipping weight |
110 lbs |
| Shipping size (inch) |
29L 27W 33H |